Thoughts on layout?
We're looking at pronorm y-line, mereway futura or alno starline. Plain white, preferably matt, finish. Silestone countertops in either grey quartz, or white quartz with coloured flecks throughout. White glass splashbacks.
The service voids at the top left and right of the plan are structural and cant be altered, unfortunately. The one on the left is a vent any extractor will have to run to. The one on the right is our water supply & hot water tank.
Extraction is a ***** ;( if we run an overhead hood its going to ruin the openness of the kitchen, but if we use a downdraught extractor, we're going to probably have to use an in room filter rather than running to the vent - I have no idea how effective those charcoal filter units are these days.
Our current plan includes:
1 45cm wide dishwasher door (position 3 below)
1 60cm wide washing machine door (position 5)
1 tall (230cm?) cabinet for 60cm tall oven & 45cm tall microwave oven (position 1)
1 tall narrow (230cm tall, no wider than 50cm) pantry cupboard with pull out baskets (position 2)
These two together take up a 110cm gap between the two immovable service voids.
1 60cm sink unit (position 4)
1 120cm corner unit with pull out tray shelves (position 6)
2 tall 60cm wide cabinets for full size (178cm) fitted freezer/fridge, storage above (position 7 & 8)
1 120cm wide drawer unit (positions 11, 12)
1 60cm wide drawer unit (position 13)
4 half depth 60cm drawer units (position 10, 14, 15, 16)
3 80cm wide tall (90cm?) wall cabinets (position 17, 18, 19)
s'why I'm interested in opinions!
